CP-23 will emitĬontinuous beeps until two-way communication is opened. If CP-23 is in the low battery status, when you press the Active Button to dial anĮmergency call or alarm, the green and red LEDs will be turned on. Its red LED will show 3 flashesĮvery 3 minutes until the battery is replaced. Low battery signal to notify the Control Panel of its status. When battery voltage is low, CP-23 will send a Replace battery with the correct size and voltage.ĬP-23 features auto low battery detection. GREEN LED ON: Receiving a learning signal from the Control Panel CP-23 isĬP-23 uses 2 x 1.5V AA lithium batteries as its power source. GREEN LED FLASHES: Having transmitted a signal to the Control Panel providing Two-way voice communication when CP-23 is low on battery RED LED FLASHES: Having transmitted a signal to the Control Panel providing RED LED ON: Registering CP-23 to the Control Panel CP-23 is triggered when low To terminate both the reporting and the two-way communication, press and hold theĪctive Button for 8 seconds. ![]() Period is determined by the Control Panel. Open a remote two-way voice communication. If the two way communication is enabled, CP-23 will stop emitting beeps. When there is an incoming phone call, you can press the Active Button to answer it. During signal transmission, the CP-23 will emit continuous ![]() Sec and then becomes flashing to indicate alarm signal transmission to the Control Once the button is pressed, the Green LED lights on for 3 ![]() Press the Active Button once will activate the Control Panel, causing it to dialĮmergency call or alarm.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |